• DIY car wash foam gun

DIY car wash foam gun is suitable for high-pressure cleaning machines, small and large can work perfectly.Save water, environmental protection.It is a contactless car wash and it can save you time and effort.The thick foam acts as a melting, making the paint slip, thus reducing whirlpool marks and scratches.Just fill up the reservoir bottle with soap, click in to your existing pressure washer lance or trigger, adjust the knob for your desired foam level, and spray! Hose water from compressor comes quick for a cleaner advanced automotive dirt removal.

How to use the car wash foam gun :

1. Place the raw tape on the brass tube (two threads), each thread requires 50cm raw tape.
2. Place the fittings/adapters with brass tubes and straws on the foam gun device.
3. Fill the PE bottle with the required amount of shampoo.
4. Fill the PE Bottle with water (for good results, use warm water, it is recommended to use 20% of the foaming Solution + 80%).
5. Shake the PE bottle and mix thoroughly to wash the foaming source liquid and water.
6. Connect the PE bottle to the foam spray gun.
7. Install the accessory/adapter on the high-pressure cleaning gun and it will be ready.

Product Specifications:

Pressure range: 2000psi-5000psi (small and large pressure cleaning machine work)

Durability: 10 years

Bottle capacity: 1000ml (1L)

Building materials: Solid brass, heat-resistant nylon (called PA material) and HDPE bottles.

Maximum water temperature: 60 ℃